Brew it stick - tea
WHAT YOU WILL NEED
Loose leaf tea
Hot Water
Timer
Coffee Cup
BREW TIME: Infusing for a minimum of 4 minutes, however to increase strength you can leave to brew for longer

STEP 1
Twist the handle anti-clockwise to detach from chamber. Fill 2/3 the way with loose leaf tea.

STEP 2
Replace the handle and secure.

Step 3
Slowly pour hot water through the 360° handle filter. Pour until desired water level is reached then submerge.
*Top Tip: Hold the stick at a slight angle when pouring over the filter and slowly twist as this will help the water reach every leaf.

STEP 4
Once submerged in the water, slowly twist and stir the Brew It Stick for 20 seconds then leave in the water for a minimum of 4 minutes.
*Top Tip: Gently tap the Brew It Stick up and down against the bottom of the mug to knock out any air to prevent floating.

STEP 5
Once brewed, remove the infuser from the mug and place into the stand.
Simple To Clean: Twist the handle to detach from the chamber and pour the used leaves into the bin. Rinse the basket and handle with warm water or place in the dishwasher.